Basic Repairs

✅ Recoil Repair + Parts – The recoil starter is repaired or rebuilt with any necessary replacement parts to ensure smooth and reliable starting.

✅ Chainsaw Sharpen on Saw & Adjust – The chainsaw chain is sharpened while fitted to the saw, with proper tension and alignment adjusted for optimal cutting performance.

✅ Chainsaw Chain Sharpen (Off Saw) – The chain is removed from the saw, sharpened for a precise cutting edge, and inspected for wear or damage.

✅ Cylinder Sharpen (No Bearings) – The cylinder blades are sharpened without disturbing the bearings, restoring a clean and accurate cutting edge.

✅ Bottom Blade Sharpen – The bottom blade is removed, ground, and sharpened to ensure a smooth and professional-quality finish.

✅ Sharpen Cylinder & Bottom Blade (QX System) – Both the cylinder and bottom blade are sharpened and set to precise tolerances for the QX cassette system, ensuring a clean and efficient cut.

✅ Sharpen Cylinder & Bottom Blade – Both the cylinder and bottom blade are fully sharpened and adjusted for optimum cutting performance.

✅ Rotary Blade Sharpen & Balance – Rotary mower blades are sharpened and then carefully balanced to reduce vibration and provide an even, clean cut.

✅ Short-Handled Shears Machine Ground – Short-handled shears are precision machine-ground to restore a sharp and smooth cutting edge.

✅ Long-Handled Shears Machine Ground – Long-handled shears are machine-ground for a crisp, clean edge and precise cutting.

✅ Sonic Clean – Components are ultrasonically cleaned to remove dirt, grease, and debris, leaving parts thoroughly clean without damage.

✅ Flash Test – The machine is electrically tested to ensure it meets safety standards and is safe for operation.

✅ Electric Hedgecutter Sharpen (Includes Flash Test) – The hedgecutter blades are sharpened to restore a clean cutting edge, and the machine is flash-tested for electrical safety.

Book In Now